| | | |
| |
| |
| |
| Description: |
Lonestar Specialties, LLC has developed an outstanding synthetic primer. It is a solution
of polymeric resins, modified and adjusted on plasticizers and a stabilizer in a
blend of special solvents. It has outstanding quick-drying characteristics and will
serve to develop a bond with all Reilly Enamels under the most difficult field conditions.
|
| Uses: |
#122M Black Synthetic Primer, the all-season pipeline primer, is designed to dry faster than cut
back type primers under all temperature
conditions. This fast-drying action permits the application of hot enamels over the
primed surface within three to five minutes under average weather conditions,
virtually eliminating primer contamination. This primer conforms to AWWA Specification
C-203 for Type B Primer.
|
|
| | Minimum |
Maximum |
| Specific Gravity: |
25/25＜C. (Approx.) |
1.13 |
--- |
| Flash Point: |
Tag Closed Cup, F＜ |
110 |
--- |
| Drying Time: |
Minutes (to touch in lab, at 25＜C,
50% relative humidity) |
2 | 10 |
| Minutes (hard) |
--- |
60 |
| Coverage: |
Application Rate, Sq. Ft./gal. |
400 | 800 |
| |
Application Rate for Meeting
AWWA C-203 Spec. Sq. Ft./gal |
250 | 400 |
| Recommended
Application Thickness: |
Wet Mils |
3.5 |
--- |
| |
Dry Mils |
0.77 |
2.0 |
| VOC Content: |
g/L |
--- |
116 |
| % Solids by Weight: |
|
28.5% |
--- |
|
|
Information contained in this publication is accurate to the best knowledge and belief of Lonestar Specialties, LLC Any information or advice
obtained from Lonestar Specialties, LLC is also given in good faith and it remains at all times the responsibility of the customer to ensure that
the materials are suitable for the purpose intended. Due to a policy of continued development work, and according to the availability of raw
materials, products may differ in detail from those described and are offered subject to the Company's conditions of sale.
|
|
| |
|
