| | Minimum |
Maximum |
| Softening Point: |
(A.S.T.M. D36) |
220＜F |
240＜F |
| Penetration: |
(A.S.T.M. D5) |
|
|
| |
77＜F 100 gr. 5 sec. |
10 |
20 |
| |
115＜F 100 gr. 5 sec. |
15 |
55 |
| Ash: |
(Mineral Filer) |
|
|
| |
% Thru 325 Mesh
(A.S.T.M. D546) |
90 |
--- |
| |
% by Weight
(A.S.T.M. 2415) |
25 |
35 |
| Specific Gravity: |
@ 77＜F
(A.S.T.M. D71) |
1.4 |
1.6 |
| High Temp. Sag Test: |
(AWWA C203-97-5.3.4)
24 hours@160＜F |
|
1/16" |
| Low Temp. Crack Test: |
(AWWA C203-97-5.3.5)
6 hours @ 20＜F |
|
None |
| Peel Test: |
(AWWA C203-97-5.3.6)
80＜F - 160＜F |
|
None |
| Direct Impact Test: |
@ 77＜F
(AWWA C203-97-5.3.7.1) |
--- |
10 sq. in. |
| Indirect Impact Test: |
(AWWA C203-97-5.3.7.2) |
--- |
2 sq. in. |
| |
|
|
|
| Application:
Temperatures: |
450＜F - 500＜F |
|
|
| Minimum Safe Handling
Temperature: |
15＜F |
|
|
| Temperature Exposure
Range: |
-20＜F-160＜F |
|
|
Information contained in this publication is accurate to the best knowledge and belief of Lonestar Specialties, LLC Any information or advice
obtained from Lonestar Specialties, LLC is also given in good faith and it remains at all times the responsibility of the customer to ensure that
the materials are suitable for the purpose intended. Due to a policy of continued development work, and according to the availability of raw
materials, products may differ in detail from those described and are offered subject to the Company's conditions of sale. |
